Ph: 916-331-0240
Vegetable Gardens
1/4" in-line drip emitter tubing works well for vegetable garden rows. It is easy to adapt the number of emitters lines with rows of vegetables or flowers. With emitters every 6", the row gets wet all along the tubing. With the water close to the plants, excess weed growth is reduced compared to overhead sprinkler irrigation.
1/2" drip tube is used as the header across the rows. The 1/4" emitter line is connected to the 1/2" with 1/4" barb x barb fitting. At the end of the 1/4" use a hole or goof plug to cap the end of the line.
The 1/4" emitter line is easily moved to the side after harvest for bed preparation for the next planting. This raised bed also has Vari-Jet microsprays in the corners that are use to sprinkler the seeds till germination.
A simple valve, filter and pressure regulator in a raised bed. The valve can be operated manually or connected to an irrigation controller. The filter protects against bugs and dirt that get into the system via the air gap on the anti-siphon portion of the valve.
Home
Drip
Sprinklers
Valves
Controllers
Contact
Repair Parts
Lighting
Home
Drip
Valves
Controllers
Sprinklers
Repair Parts
Lighting
Contact
Flower Beds
Vegetable Gardens
Pots
Application
Vines
Drip Products
Design
Trees
1/4" in line drip emitter tubing around tomatoe plants in a raised bed.