|
|
Ph: 916-331-0240
Quad Bubbler
4 port drip/bubbler emitter that threads onto a 1/2" riser replacing a shrub spray. Available in 2, 6, 10 & 20 gph flows. No pressure regulator required, filter helpful but not necessary. Best use: retrofit of shrub sprays in flower beds. Larger output units (10 and 20 gph) provide enough flow through each port to operate a microspray or 1/4" in-line emitter tubing.
4 port drip/bubbler emitter that threads onto a 1/2" riser replacing a shrub spray. Available in 2, 6, 10 & 20 gph flows. No pressure regulator required, filter helpful but not necessary. Best use: retrofit of shrub sprays in flower beds. Larger output units (10 and 20 gph) provide enough flow through each port to operate a microspray or 1/4" in-line emitter tubing.
Octa Bubbler
8 port drip/bubbler emitter that threads onto a 1/2' riser replacing a shrub spray. Available in 2, 6, 10 & 20 gph flows. Cap can be removed to change internal ports so one Octa bubbler can have different flows at each port. No pressure regulator required, filter helpful but not necessary. Best use: retrofit of shrub sprays in flower beds. Larger output units (10 and 20 gph) provide enough flow through each port to operate a microspray or 1/4" in-line emitter tubing.
8 port drip/bubbler emitter that threads onto a 1/2' riser replacing a shrub spray. Available in 2, 6, 10 & 20 gph flows. Cap can be removed to change internal ports so one Octa bubbler can have different flows at each port. No pressure regulator required, filter helpful but not necessary. Best use: retrofit of shrub sprays in flower beds. Larger output units (10 and 20 gph) provide enough flow through each port to operate a microspray or 1/4" in-line emitter tubing.
EMT 6 XERI
Rain Bird 6 outlet distribution point. Threads directly onto 1/2" riser and allows full flow to other emitters or microsprays
Rain Bird 6 outlet distribution point. Threads directly onto 1/2" riser and allows full flow to other emitters or microsprays
Elbow Riser S5R6
5" stake with 1/4" barb for poly tubing to direct water up the 6" riser to microspray. Riser can be cut down to desired height.
5" stake with 1/4" barb for poly tubing to direct water up the 6" riser to microspray. Riser can be cut down to desired height.
Xeri-Pop
Rain Bird xerigation pop up spray head has 1/4" barbed inlet. Xeri-pop will accept and operate either the 5' series or XPCN nozzles. Available in either 4" or 6" pop up.
Rain Bird xerigation pop up spray head has 1/4" barbed inlet. Xeri-pop will accept and operate either the 5' series or XPCN nozzles. Available in either 4" or 6" pop up.
Page 4 of 4
Our drip tubing is .710"
O.D. x .620" I.D. We call
it 1/2" drip tubing, other
folks call it 5/8". We
stock 100' and 500' rolls.
There are a variety different outside diameter tubing
sizes manufactured. We try to stock various
adapters to connect to them all.
Distribution Tubing
The most popular distribution tubing from the 1/2" to the emitter is 1/4". We stock the 1/4" tube in vinyl (flexible, lays flat) and polyethylene (grips tight to emitters). We also stock 1/8" tubing for certain emitters and spray sticks.
The most popular distribution tubing from the 1/2" to the emitter is 1/4". We stock the 1/4" tube in vinyl (flexible, lays flat) and polyethylene (grips tight to emitters). We also stock 1/8" tubing for certain emitters and spray sticks.
Application
1/2" Drip tube
PR 25-9PC 9 outlet pressure
regulating drip manifold. 1/2" inlet, can
be placed on existing unregulated shrub
riser. Each outlet can be regulated from
.02 to 3.5 gpm, great for drip,
micro-spray or micro-stream bubblers.